代表性学术论文 (1) Jianwei Tang, Liang Chen*, Guoqun Zhao, Cunsheng Zhang, et al., Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging, Journal of Magnesium and Alloys, 2020, 8: 654-666. (IF=11.813)
(2) Qian Cheng, Liang Chen*, Jianwei Tang, Guoqun Zhao, et al., A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation, Journal of Magnesium and Alloys, 2021, 9: 520-531. (IF=11.813) (3) Jianwei Tang, Liang Chen*, Zhigang Li, Guoqun Zhao, et al., Microstructure characterization and corrosion behavior of hollow ZK60 Mg profile containing longitudinal welds, Corrosion Science, 2021, 193: 109875. (IF=7.720) (4) Jianwei Tang, Liang Chen*, Zhigang Li, Guoqun Zhao, et al., Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy, Corrosion Science, 2021, 180: 109201. (IF=7.720) (5) Jianwei Tang, Liang Chen*, Guoqun Zhao, Cunsheng Zhang, et al., Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die, Journal of Materials Science Technology, 2020, 47: 88-102. (IF=10.316) (6) Zhigang Li, Liang Chen*, Xianliang Zhang, Guoqun Zhao, et al., Strengthening mechanism and anisotropy of mechanical properties of Si3N4p/Al-Mg-Si composites fabricated by sintering and extrusion, Materials Design, 2021, 210: 110111. (IF=9.417) (7) Liang Chen, Shengwei Yuan, Demin Kong, Guoqun Zhao*, et al., Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate, Materials Design, 2019, 182: 107999. (IF=9.417) (8) Liang Chen, Guoqun Zhao*, Junquan Yu, Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy, Materials Design, 2015, 74: 25-35. (IF=9.417) (9) Liang Chen, Guoqun Zhao*, Junquan Yu, Wendong Zhang, Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process, Materials Design, 2015,66: 129-136. (IF=9.417) (10) Jianwei Tang, Liang Chen*, Zhigang Li, Guoqun Zhao, et al., Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile, Journal of Materials Processing Technology, 2022, 300: 117401. (IF=6.162) (11) Liang Chen, Jianwei Tang, Guoqun Zhao*, Cunsheng Zhang, et al., Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process, Journal of Materials Processing Technology, 2018, 258: 165-173. (IF=6.162) (12) Liang Chen, Jixiao Zhang, Jianwei Tang, Gaojin Chen, Guoqun Zhao*, et al.，Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy, Journal of Materials Processing Technology, 2018, 259: 346-352. (IF=6.162) (13) Xiangkun Fan, Liang Chen*, Gaojin Chen, Guoqun Zhao, et al., Joining of 1060/6063 aluminum alloys based on porthole die extrusion process, Journal of Materials Processing Technology, 2017, 250: 65-72. (IF=6.162) (14) Zhigang Li, Liang Chen*, Biaohua Que, Guoqun Zhao, Cunsheng Zhang, Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes, Journal of Materials Processing Technology, 2017, 250: 65-72. (IF=6.162) (15) Liang Chen, Shugang Zhang , Zhigang Li*, et al., Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al-Cu-Mg composites with various Mg contents, Materials Science and Engineering A, 2021, 826: 142000. (IF=6.044)
(16) Jianwei Tang, Liang Chen*, Guoqun Zhao, et al., Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties, Materials Science and Engineering A, 2020, 773: 138718. (IF=6.044) (17) Yuzhu Hou, Liang Chen*, Zhigang Li, et al., Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy, Materials Science and Engineering A, 2020, 780: 139217. (IF=6.044) (18) Liang Chen, Jixiao Zhang, Guoqun Zhao*, Zongshen Wang, et al., Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets, Materials Science and Engineering A, 2018, 718: 390-397. (IF=6.044)
(19) Liang Chen, Yuzhu Hou, Zhigang Li, Guoqun Zhao*, et al., Enhancing mechanical properties and corrosion resistance of a high strength 7A99 Al alloy by introducing pre-rolling in solution and aging treatments, Journal of Alloys and Compounds, 2022, 898: 162972. (IF=6.371) (20) Liang Chen, Shengwei Yuan, Zhigang Li, Wei Zheng*, et al., Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die, Materials Characterization, 2020, 161: 110148. (IF=4.537) 代表性发明专利
(1) 一种Al/Mg/Al复合板材分流模挤压成形装置及方法，发明，201710906774.4 (2) 一种双金属管材分流模挤压成形装置，发明，201811636317.9 (3) 电脉冲辅助热挤压成形装置及成形方法，发明，201811352724.7 (4) 一种碳纳米管增强多层铝基复合材料及其制备方法和应用，发明，201910614823.6 (5) 适用于高温条件下的十字双拉综合测试平台及方法，发明，201910989139.6 (6) 一种铝合金工件挤压成型装置，发明，202111230460.X (7) 一种铝合金零件挤压模具装置，发明，202111230473.7 (8) 一种铝型材挤压焊合质量的定量评估方法，发明，201510399912.5 (9) 一种纤维增强壁板类型材复合挤压装置及其挤压方法，发明，201810137909.X (10) 一种纤维增强方管类型材复合挤压装置及其挤压方法，发明，201810137908.5
获奖情况 (1) 江苏省科技进步二等奖，第2完成人，2018 (2) 山东省高等学校科学技术一等奖，第2完成人，2018 (3) 山东省优秀硕士学位论文指导奖，2019 (4) 山东大学优秀硕士学位论文指导奖，2019 |
